PreSonus CDL18S
PreSonus CDL18S
Zoom

PreSonus CDL18S

PreSonus CDL18S
Item# CDL18S
$2,199.99

Product Description

 

CDL18s

Low-end punch that never makes you guess.

A terrific complement for any full-range loudspeaker and the perfect companion for the PreSonus® CDL12 Constant Directivity loudspeaker, the CDL18s delivers a tight, coherent low-end, driven by an integrated 1000-watt Class D power amp, and features a unique ported design that maximizes efficiency in a compact form-factor. The Dante®-enabled CDL18s provides the articulate sub-bass frequency reproduction demanded by audio professionals thanks to its custom 18-inch low-frequency transducer with 4-inch voice coil, providing 7 mm of driver travel before over-excursion to move more air for a low-end punch you can feel. When flown together in a vertical array, or combined for ground-stacked applications, the CDL18s and CDL12 form a complete, coherent loudspeaker system with an even response across the frequency spectrum.

 

 
Technical Specifications
Acoustic Performance
Configuration Active Subwoofer
Frequency Response (-3 dB) 42 Hz – 150 Hz (Variable)
Frequency Response (-10 dB) 36 Hz – 144 Hz
Maximum Peak SPL 135 dB
Crossover Frequency 90 Hz
Transducer
LF Transducer 1x18" Ferrite magnet
Voice Coil Diameter 4"
Amplifier
Type Class D
Total Power Output 2,000W Peak, 1,000W Program (500W RMS)
LF Power 2,000W Peak, 1,000W Program (500W RMS)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz
Connections and Controls
Input Channels 1 Line
Input Connector Types (XLR)
Line Input Impedance 40 k?
Maximum Input +4 dBu
Output Connector 1 XLR, Direct out
Controls Preset Select, Polarity Invert
Indicators Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
DSP
Effects Compression, Polarity Invert, Limiting, Delay, 8-band EQ and preset selection via WorxControl
Bit Depth 24-bit
Sample Rate 48 kHz
Enclosure
Material 15 mm eucalyptus plywood
Finish Chemline™ Polyurea
Grille Powder-coated steel
Dimensions (HxWxD) 23.2” x 20.8” x 24” (590 mm x 529 mm x 610 mm)
Unit Weight 105 lbs. (47.6 kg)
Handles 2 (one on each side)
Safety
Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection Limiter
Power
AC Power Input 90-260V~, 50-60 Hz
AC Power Consumption (1/8 Power) 4.2 amps
Suspension Mounting
Rigging Points M20 threaded pole receiver, integrated rigging (10:1 load)
Optional Accessories
Rigging CDL Rigging Grid, CDL Rigging Extension Bar, CDL Rigging Sling
Other ULT18-CSTR 4” Caster Kit, CDL18s-Cover Dust Cover
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
 
 

Scroll to top