FBT VERVE 112 A 2-way Bass reflex Active speaker
FBT VERVE 112 A 2-way Bass reflex Active speaker

FBT VERVE 112 A 2-way Bass reflex Active speaker

Item# VERVE-112-A

Product Description


The new Verve Speakers Series features birch plywood enclosures with a scratch resistant textured paint finish, entirely ‘Made in Italy’ and offers outstanding performance at competitive prices.

New high efficiency PWM and very light yet powerful class D integrated amplifiers, a new digital signal processor with 4 EQ presets with an extremely low noise floor. VERVE speakers are equipped with constant directivity rotatable horns, high efficiency woofers and HF compression drivers, higher quality protected crossover networks. Available in 5 bi-amplified active, 5 passive models and 2 coaxial bi-amplified stage monitors. To extend the low frequency response, VERVE speakers can be matched with FBT SUBLine subwoofers, available in 12’’, 15’’ e 18’’ models.

  • 320 mm (12”) LF woofer with 64 mm (2.5”) voice coil, custom made for FBT
  • 25 mm (1”) exit throat B&C HF compression driver with 36 mm (1.4”) voice coil
  • Frequency response from 52Hz to 20 kHz
  • 80°H x 50°V Constant Directivity Horn
  • 6 x M10 suspension points, wall bracket mount flange plate, 35 mm (1 3/8”) top-hat speaker stand socket, one integrated handle
  • 2-way, bi-amplified, bass reflex design
  • Bi-amped: 400W RMS LF, 100W RMS HF, Class D power amplifiers
  • Digital Signal Processor with 4 Equalization Presets
  • 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
  • High efficiency switch mode power supply
  • Control Panel features balanced XLR/Jack input and XLR LINK OUT, Volume, EQ Presets, HP Filter, 3 status indicators
  • 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
  • Bi-amplified models with high dynamic Class D amplifiers 400W + 100W RMS to provide a pleasant sound even at loud volume
  • New ultra-light woofers custom made for FBT with a weather resistant coating, extremely reliable and efficient
  • High efficiency switch mode power supply
  • Advanced filter algorithms including dynamic equalization at low frequencies and advanced energy control to allow high SPL while always granting reliable and distortion-free audio reproduction
  • An increase in total SPL thanks to FBT’s new digital limiter algorithms and increased amplifier power output
  • Passive models: soft-trip high-frequency protection circuitry to ensure proper operation even in overdriven conditions and superb quality components, metallic polyester condensers and large diameter coils. All components embedded in special resin to ensure total immunity to vibration
  • Fully rotatable constant directivity horn to adjust HxV angle coverage in the non-coaxial
  • models
  • Ergonomic integrated carrying handles, M10 rigging points, top-hat speaker stand socket and wall bracket mounting hardware

New Digital Signal Processor with 4 factory equalization presets provides simple and efficient

EQ adjustment. The presets have been extensively tested in the anechoic chamber to optimize the sound performance for different applications.

  • ORIGINAL: is the typical ‘VERVE’ sound
  • BOOST: bass and high are emphasized for a rich and engaging sound
  • HI-END/ VOCAL: very fl at response, typical of the top touring systems. Provides increased intelligibility and presence for vocals and speech
  • WARM: provides a full bodied response to the Low/Mid frequencies and less aggressive on the high.
Code: 35968 / W
Configuration: 2 way
Built-in amplifier LF/HF: 400 / 100 W RMS
Built-in amplifier peak LF/HF: 800 / 200 W
Frequency response: 52Hz - 20kHz -6dB
Low Frequency woofer: 320 bobina 64 inch
High Frequency driver: 25 bobina 36 inch
Maximum SPL cont/peak: 124 / 130 dB
Dispersion: 80° x 50° HxV
Input impedance: 22 Kohm
Crossover Frequency: 1,6 KHz
AC Power requirements: 450 VA
Input connector: XLR con loop
Power cord: 5 m/ft
Net Dimension (WxHxD): 394 x 645 x 380 mm/inch
Net Weight: 20,6 Kg/lb
Transport Dimension (WxHxD): 495 x 728 x 467 mm/inch
Transport Weight: 23,4 Kg/lb

Scroll to top