|RANE MLM 103 Mic/Line Mixer (3U)|
6 Mic / Line In; 2 Stereo Line In, 3 Outputs, Output assign per input, Euroblock on all I/O
The Rane MLM 103 Mic/Line mixer features six balanced, studio-grade microphone inputs and two balanced, stereo line-level inputs. The microphone preamplifiers feature direct outputs. These can monitor the signal 'pre' or 'post' the mix Level control via rear panel switches. Each microphone and stereo line input features three-band EQ and mix level controls. Input overload indicators are peak detecting and illuminate 4 dB before clipping. Three balanced outputs are provided. A and B outputs may be used as a stereo pair in a single zone or as two independent mono zones. The AUX output is mono. All connections are via Euroblock connectors.
Inputs 1 through 6 may be individually switched between Mic or Line level via rear panel switches. Inputs operate in Mic mode with a gain range of +12 dB to 60 dB. Each pair of inputs may operate with or without 15 volt phantom power via rear panel switches. When Inputs are operated in Line mode, the gain range is -4 to 12 dB. When Line mode is selected, phantom power is defeated. Each input may be assigned to the A, B or AUX output.
Stereo Line Inputs 7 through 10 accommodate +24 dBu signal levels. The gain range is infinity to +12 dB. The A/B assign switch for inputs 7/8 assigns 7 to output A and 8 to output B. The A/B assign switch for inputs 9/10 assigns 9 to output A and 10 to output B. The mono switch sends the sum of inputs 7 and 8 (or 9 and 10) to bus A and bus B. Assigning 7/8 or 9/10 to AUX sends the sum of input 7 and 8 (or 9 and 10) to the AUX output.
The A, B and AUX outputs feature independent level controls and 10 segment meters with peak hold. Each balanced output provides an additional 6 dB of gain and delivers a minimum signal level of +24 dBu into a 10k ohm load.
The MLM 103 features an internal high efficiency, universal voltage power supply.
Six Studio-grade Mic Preampliers
Mic or Line-level Operation
+12 volt Phantom Power
Continuously varaiable gain trim
Direct outputs (pre-or post-mix level)
A/B/AUX Assign switches
Input overload Indicator
EQ& Assign switch security cover included
Two Balanced Stereo Line-level Inputs
A/B/AUX Assign Switch
Input overload indicator
A/B/AUX Balance Outputs
Independent level control
10-segment meter with peak hold
100-240 VAC Universal Power Suppy
Includes Security Cover for EQ & Assign Switches