Home > LIGHTING - CLUB - DJ - PRO > Martin > Martin M5500 Decorative Products > Martin Exterior 430 Red, US Model, Aluminum


Martin Exterior 430 Red, US Model, Aluminum - click to enlarge

Martin Exterior 430 Red, US Model, Aluminum

 

Great for applications requiring just one color, the Exterior 430™ Blue. The Exterior 430 also uses a unique color calibration system in its Blue units to ensure uniformity across fixtures and over time, plus the added ability to adjust colors to precisely match the look needed in your lighting design. Color fades within a narrow range, such as magenta – blue – turquoise, are also possible.

  • Extremely bright one color fixture (Blue)
  • Very high efficacy
  • Adjustable colors around the prime color
Features
  • Extremely bright single color (up to 7000 lm)
  • Calibrated Blue ensuring color consistency
  • Adjustable color within Blue color ranges
  • Very low power consumption (max 139 W)
  • Choice of beam angles - 7.5°, 16°, 33°, 52°
  • Internal power and control
  • Super rugged IP65 housing
  • Choice of white, black or aluminum housing
  • 0 – 100% intensity control
Tech Specs
Physical
Length: 169 mm (6.8 in.) including cable gland Width: 307 mm (12.1 in.) Height: 401 mm (16.8 in.) Weight: 7.6 kg (16.8 lbs.) including bracket
Dynamic Effects
Dimming: 0 - 100% continuous Color fine-tuning: Continuously variable
Control and Programming
Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 1 or 3 depending on mode DMX address setting: PC with Martin MUM™ software and DABS1™ hardware interface Stand-alone trigger options: Internal timer and/or ambient light level Stand-alone and master/slave programming: PC with Martin MUM™ software and DABS1™ hardware interface 26-bit control (internal): Single color intensity Protocol: USITT DMX512-A Receiver: RS-485 Firmware update: Serial upload via DMX link
Optics
Light source: Cree XP-E high power emitters Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Very Narrow (no diffuser), Narrow, Medium and Wide beam angles available *Figure obtained under manufacturer's test conditions
Construction
Color: Clear anodized, black or white Housing: Anodized aluminum Mounting bracket: 8 mm (0.32 in.) anodized aluminum Front glass: 6 mm (0.24 in.) anti-reflection coated Protection rating: IP65
Installation
Orientation: Any Mounting: Flat surface at any angle, pedestal or other suitable support Vertical aiming: 330° Minimum distance to illuminated surfaces: 0.1 m (0.33 ft.)
Connections
Power cable entry: IP68 cable gland Power connection: 1.8 m (5.9 ft.) cable tail Data cable entry: IP68 cable gland Data connection: 1.8 m (5.9 ft.) combined input + output cable tail
Electrical
AC power: 100-240 V nominal, 50/60 Hz Standby power: 13 W Power supply unit: Integrated, auto-sensing multi-voltage Main fuse: 2.5 AT (slow blow)
Typical Power and Current
100 V, 50 Hz: 139 W, 1.4 A, PF 0.990 100 V, 60 Hz: 139 W, 1.4 A, PF 0.989 110 V, 60 Hz: 137 W, 1.3 A, PF 0.988 120 V, 60 Hz: 136 W, 1.2 A, PF 0.986 208 V, 60 Hz: 133 W, 0.7 A, PF 0.932 230 V, 50 Hz: 132 W, 0.7 A, PF 0.925 240 V, 50 Hz: 131 W, 0.7 A, PF 0.886 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (33° F) Maximum surface temperature, steady state, at 40° C ambient: 90° C (194° F) Total heat dissipation (calculated, +/- 10%): 480 BTU/hr.
Approvals
EU safety: EN 60598-2-5 (EN 60598-1), IEC/EN 60825-1 EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3 US safety (US model): UL 1598 Canadian safety (US model): CAN/CSA C.22.2 No. 250
CE ETL C US Intertek
Included Items
Adjustable mounting yoke Narrow, Medium and Wide diffusers Hard-wired 1.8 m (5.9 ft.) power and data in/out cable tails without connectors User manual
Accessories
Diffuser, Exterior 400 Series, Narrow: P/N 41600122 Diffuser, Exterior 400 Series, Medium: P/N 41600123 Diffuser, Exterior 400 Series, Wide: P/N 41600124 Diffuser, Exterior 400 Series, Narrow, Directional 15°x1°: P/N 41600156 Diffuser, Exterior 400 Series, Medium, Directional 30°x3°: P/N 41600157 Diffuser, Exterior 400 Series, Wide, Directional 60°x1°: P/N 41600158 Diffuser, Exterior 400 Series, Wide, Directional 60°x10°: P/N 41600159 Exterior 200 floor stand: P/N 91611305 Safety eyebolt: P/N 91611239 3-pin male XLR connector, cable-type, IP65: P/N 91611306 3-pin female XLR connector, cable-type, IP65: P/N 91611307
Related Items
Martin DABS1™ USB interface box incl. cables: P/N 90758090
Spare Parts
2.5 AT main fuse: P/N 05020010
Ordering Information
Exterior 430 Blue, EU Model, Aluminum: P/N 90545055



90545153List price: $4,530.00Your price: $4,530.00

Quantity:

 


 

Cables - Connectors | Computer DJ - Audio | Amplifiers | Cartridges | Cases - Racks - Stands | CD / MP3 Players | Lighting - Club - DJ - Pro | Video Walls | Truss | Headphones | Microphones | Mixers - Consoles | Processors - Rack Gear | Speakers - Monitors | Systems - Packages | Turntables | Karaoke Gear | Musical Instruments | PA Systems | Production Gear | Studio Recording Gear | Outlet - Open Box | Retired Products | Photo Archives | Info - Terms | Testimonials | Privacy Policy | Contact Us | Tour Six Star DJ |Links | Site Index | Home



Copyright © 1996-2017 SixStarDJ.com - All rights reserved

Providing quality service since 1996, sixstardj.com is your top supplier of dj equipment, professional audio, lighting products, computer audio & musical instrument products from the top brands in the music industry.

[[ ALL PRODUCTS SUBJECT TO AVAILABLE STOCK - SOME ITEMS MAY NOT BE AVAILABLE FOR IN-STORE PICKUP. ]]