CAD AUDIO ICM417 Cardioid Condenser Overhead Microphone
|CARDIOID ELECTRET CONDENSER MICROPHONE
deal for miking cymbals, overheads and stringed instruments, the ICM417
electret condenser produces a natural, transparent sound with exceptional
accuracy and detail. The ICM417’s cardioid pattern and tranformerless design
produce a balanced frequency response across the spectrum with minimal distortion.
|Packaged in a rugged small, all metal body, the ICM417 electret
condenser microphone provides natural, transparent sound
quality. The transformerless design of this cardioid condenser
provides optimum low frequency response and low distortion.
Designed for use with cymbals, overheads, and stringed
instruments, the wide, flat frequency of the ICM417, coupled
with the CAD exclusive I.N.R.TM shockmount, make this an
extremely high quality percussion microphone, as well.
Generating Element: Electret condenser (Phantom Powered)
Polar Pattern: Unidirectional (Cardioid)
Frequency Response: 40 Hz - 20 kHz
Open Circuit Voltage: -37dBV (14mV) @ 1Pa
Impedance: 250 Ohms
Dynamic Range: 104 dB
Equivalent Noise Level: Less than 26 dB, A weighted
Maximum SPL: 130 dB (1% THD, open circuit)
Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
Current Required: Less than 5 mA over operating voltage range
Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2
relative to pin 3
Shock Mounting System: I.N.R.TM (Impact Noise Rejection - proprietary rubber compound)?