AMERICAN DJ OCTO BEAM WW 8-head beam effect with eight warm white LEDís
The ADJ Octo Beam WW produces a classic effect with a modern twist! The effect looks like an all white Halogen bulb effect but in essence uses 8x 3-Watt warm white LEDs. It produces sharp, bright beams at a 3.4 degree beam angle. The Octo Beam WW has 3 DMX channel modes (1, 8 or 10), 3 operational modes (Sound Active, Show or DMX modes), LED pulse and strobe effects and 0-100% electronic dimming.
The rear control panel features a 4-button LED display menu, 3-pin DMX In/Out connections and IEC In/Out for power linking up to 12 units at 120V or 19 units at 230V operation. This fixture is compatible with the ADJ UC3 easy-to-use controller.
8-head beam effect with eight warm white LEDís
3 DMX Channel modes: 1, 8 or 10 channel modes
3 Operational modes: Sound Active Mode, Show Mode, & DMX Controlled
Stand Alone or Master-Slave Configuration & Manual control of each fixture head setting Dim and Full on.
LED pulse & strobe effect
Electronic Dimming: 0 - 100%
Beam angle: 3.4-degree
Linkable via 3-pin XLR cable
4-button digital display on rear panel
IEC AC IN/OUT on rear to daisy chain power (up to 12 Octo Beam WWís @ 120V and 19 Octo Beam WWís @ 230V )
Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
Includes mounting yoke to mount on a wall or on to trussing
Light Source: 8x 3W (2700K-3300K) Warm White LED source (Rated at approximately 50,000 hours)
Safety loop on rear
Run all night Ė No duty cycle - Low power consumption
Multi-voltage: 100-240V, 50/60Hz
Power Draw: 28.9W max (All LED's @ Full On)
Dimensions (LxWxH): 25Ē x 9Ē x 8Ē / 632.6 x 226.9 x 199mm
Weight: 8 lbs. / 3.5 kg.